-
You do not have any products in your shopping cart yet.
Camina Schmid Lina G 100 Gas Fireplace
Schmid Lina G 100 Gas Fireplace
Camina & Schmid Gas Fireplace Inserts – Innovation and Safety at its Best
Simply Switch On and Off
Camina & Schmid is a renowned manufacturer of high-quality gas fireplaces. Their wide range of products offers the right model for every living situation. Camina & Schmid gas fireplaces are characterized by their high quality, durability, and attractive appearance.
With Camina & Schmid's versatile gas fireplaces, you can instantly transform your home into a place with a special atmosphere. Enjoy the comfort of a gas fireplace: pleasant warmth from a fire at the touch of a button. Easy to maintain and clean to operate – everyday stress is quickly forgotten.
Fire at the Touch of a Button
The fire in Camina & Schmid gas fireplaces can be adjusted to eight levels. These eight levels remain constant at their respective flame heights, creating an even flame pattern. There is also a ninth level – the ECO setting. During the program, the gas fireplace varies the previous flame height levels. This creates a dynamic flame pattern and uses less energy. The flame in Camina & Schmid gas fireplaces is continuously monitored electronically. In the event of a power failure, two springs in the solenoid valve ensure that the gas supply is immediately shut off. If the gas pressure fluctuates, the gas supply to the gas fireplace is immediately stopped by the gas control valve.
Ceramic Logs
Camina & Schmid gas fireplaces are characterized by an impressive, varied flame pattern. This is created by the heart of the system: unique ceramic logs cast with integrated tungsten filaments. When they come into contact with the flame, these filaments glow, creating a deceptively realistic ember effect.
With the additional LED ambient lighting, a bed of glowing coals is recreated in the gas fireplaces. The simulated bed of embers from a fireplace can be used both as a light source when the device is turned off and when the gas fireplace is in use, adding even more dimension to the flame pattern.
With Camina & Schmid gas fireplace inserts, you can experience a modern fire experience combined with intelligent control options and maximum safety.
General information
- Time-controlled and room-temperature-dependent control.
- Manual operation via a bidirectional wireless remote control.
- Remote control functions: On/Off. Flame pattern adjustment. Programmable time programs. Room temperature control with feedback on the current setting.
- Back and side panels made of sheet steel or glass ceramic.
- Firebox finishes with fire-resistant imitation wood or ceramic fiber marble chips.
- Decorative burner chips for additional aesthetic details.
- Closed operation for maximum protection.
- Integrated safety system that protects the gas fireplace and glass ceramic in the event of an explosion.
- Glass ceramic panels can be easily opened for cleaning and maintenance.
- All models meet the fire protection requirements of T400.
- Perfectly fitting connection pieces for LAS systems for an airtight installation.
- Control and regulation unit fully pre-assembled in the base area.
- Each gas fireplace comes with installation and operating instructions.
Optional accessories / equipment: flexible gas safety hose 1500mm pre-assembled, LED ambient lighting (power connection required), inner lining glass ceramic black (glossy)
Technical Data Lina G 100
- Nominal heat output: 8 kW
- Power range: 2.5–8.0 kW
- Electrical power consumption: 10 W (max.) / 3 W (standby)
- Flue pipe connection diameter: 130/200 mm
- Recommended free cross-section (supply/exhaust air): 2 x 150 cm² each
- Maximum thickness of the fire table: 20 mm
- Maximum load of the panel: 80 kg
- Number of required sockets: 1
- Number of required sockets when using the LED ambient lighting: 2
- Gas connection: 1/2"
- Approved air-exhaust system (LAS): Camina & Schmid
- LAS gas installation type: C11, C31, C91
- Firebox appearance: Ceramic logs
- Weight including control unit and ceramic logs: approx. 235 kg
Important note: The connection of a gas fireplace may ONLY be carried out by a specialist company!
Gas chimneys by Camina & Schmid may ONLY be installed with the LAS flue gas system by Camina & Schmid; otherwise they are not certified and will not be approved.
We also gladly make you a complete offer including the required pipes; For this we need information about the planned execution with altitude information.
Shipping conditions
Delivery is only possible within Germany.Other countries only on request; pick up is also possible!
Shipping costs (including statutory VAT)
Deliveries within Germany:
We calculate the shipping costs based on the order value (gross goods value):
up to a goods value of 99.99 EUR = 6.90 EUR
free shipping within Germany from a goods value of 100 EUR
Manufacturer: Camina & Schmid
Feuerdesign und Technik GmbH & Co. KG
Gewerbepark 18
49143 Bissendorf
Phone +49 5402 7010-10
Fax +49 5402 7010-70
www.camina-schmid.de
Protective measures/safety instructions for installation (wood fires and stoves)
The following protective measures and safety instructions must be strictly observed:
- Fireplaces may only be installed in rooms and in places where the location, structural circumstances and type of use do not present any hazards.
- No modifications may be made to the appliance.
- Only use the approved system for exhaust gas removal/combustion air supply.
- Work on the stove system Installation, commissioning, maintenance and servicing work on the appliance may only be carried out by an authorized specialist company.
as the safety and functionality of the system depend on proper installation. - The installation must be carried out by a registered specialist company, as the safety and functionality of the system depend on proper installation. You must observe the applicable trade regulations and building regulations.
- Fireplaces must be installed in an operationally safe and fireproof manner so that hazards and unreasonable nuisances cannot occur. They must be fit for purpose for a reasonable period of time.
The appliance is designed to create a cozy atmosphere and to heat. This means that all visible surfaces, including the glass, can become hotter than 100°C. It is recommended to always place a protective grille in front of the appliance when children, the elderly or physically disabled persons are in the same room.
Protective measures/safety instructions for installing gas fireplaces
The following protective measures and safety instructions must be strictly observed:
- Installation and maintenance of the appliance may only be carried out by a recognized and competent installer in the field of gas heating and electricity.
- No modifications may be made to the appliance.
- Only use the approved flue gas extraction/combustion air supply system.
- Procedure when installing a free-standing appliance: place the appliance at the specified minimum distance from the rear wall (see information in the instructions).
- Do not cover the appliance or wrap it in an insulating blanket or other materials. Ensure that there are no flammable objects and/or materials in the radiation area of the appliance. This radiation range is 500 mm, unless otherwise specified.
- Only use the set included in the scope of delivery, for example the wooden block set or the pebble set, and place it exactly as described.
- Leave the space around the ionizing pin and the ignition pin free and never place any incandescent material around these pins.
- Make sure that the gas pipes and connections are clean and free of any impurities. Install a gas tap in accordance with the applicable regulations.
- Check the entire system for gas leaks before commissioning.
- Check the entire system for gas leaks before commissioning.
- Ensure that the pressure equalization hatch(es) at the top and/or bottom of the appliance are not blocked and check that these hatch(es) are well connected to the sealing surface before installing the appliance.
- Do not ignite the appliance until it has been fully installed in terms of gas technology, exhaust technology and electrical technology.
- Do not use the appliance if a pane is broken and/or cracked. The pane must be replaced first.
How to install a built-in appliance:
- Use fireproof and heat-resistant materials for the fireplace surround, including the top of the fireplace surround and the material inside the fireplace surround, such as the floor under the appliance and the rear wall in front of which the appliance is installed. Both panel materials and stone-like materials can be used for this purpose.
- Take appropriate protective measures to ensure that the wall behind the fireplace surround and the materials or objects located behind the rear wall do not heat up too much.
- Observe the minimum specifications regarding the internal dimensions of the fireplace surround. These have been specified for safety reasons and to avoid extreme heat build-up in the fireplace conversion.
- Ventilate the fireplace conversion using ventilation openings. These openings are crucial for safety and to prevent extreme heat build-up in the fireplace conversion.
- The electrical connections must be heat-resistant.
- Position the heat-resistant power connections away from the appliance and as low as possible in the fireplace surround.
- This applies in connection with the temperature development in the fireplace surround.
The appliance is designed to create a cozy atmosphere and to heat. This means that all visible surfaces, including the glass, can become hotter than 100°C. It is recommended to always place a protective grille in front of the appliance when children, the elderly or physically disabled persons are in the same room.
