Gas Fireplace Insert Fyn 600 from Faber
NEW
Gas Fireplace Insert Fyn 600 from Faber
Faber gas fires - individuality meets a luxurious fire experience Faber gas fires offer an impressive range of customisation options that are perfectly tailored to your personal wishes and living requirements. Faber built-in gas fires are a statement in themselves. Especially because of the wonderful burning fire and the elaborate design with natural logs or modern stones. Or the high-quality choice of materials, which ensures that you can enjoy your fireplace safely and trouble-free for many years. Especially if you operate the fireplace remotely using the remote control or your own smartphone.A Faber built-in fireplace with a typical, sleek Scandinavian look. No frames, but maximum attention for the fire. So you can enjoy exceptional moments by the fire. The Fyn is available in an upright (450) and a horizontal (600) version. Ask your Faber dealer about all the possibilities and options available for this built-in fireplace.
A fireplace with the characteristic, reliable Faber technology at an attractive price.
Logs of realistic quality.
Also suitable for small installation areas or smaller rooms/houses.
Faber gas fires combine timeless design, efficient heat output and versatile customisation options. They transform any room into a stylish oasis of well-being with a very special charm.
Details Gas Fireplace Fyn 600:
- Manufacturer: Faber
- External dimensions W x H x D mm: 684 x 649 x 335
- Fire view W x H x D mm: 598 x 350
- Burner system: Emberbed Burner
- Interior decor: Logs & white pebbles
- Fire view: 1-sided
- Rear wall: Flat steel
- Remote control: GV60
- Heating output: 4.7 kW
- Control system: Mertik
- Flue gas diameter in mm: 100/150
- App control: no
- Energy efficiency class:
Manufacturer: Glen Dimplex Benelux
Flame Europe
Saturnus 8
8448 CC Heerenveen
Netherlands
Phone +31 513 656 500
www.faberfires.com
Danger and warning notices for effect burners (electric fires)
- These appliances must not be used unsupervised by children or disabled persons.
- The design of the appliances must not be modified.
- Only spare parts approved by the manufacturer may be fitted.
- Read the operating instructions carefully before use.
- Do not place any flammable objects in or on the appliance.
- Never cover the appliance.
Protective measures/safety instructions during installation of gas fireplaces
The following protective measures and safety instructions must be strictly observed:
- Installation and maintenance of the appliance may only be carried out by a recognized and competent installer in the field of gas heating and electricity.
- No modifications may be made to the appliance.
- Only use the flue gas extraction/combustion air supply system supplied by DRU.
- Procedure for installing a freestanding appliance: place the appliance at the specified minimum distance from the rear wall (see the information later in this text).
- Do not cover the appliance or wrap it in an insulating blanket or other materials. Ensure that there are no flammable objects and/or materials in the radiation area of the appliance. This radiation range is 500 mm, unless otherwise specified.
- Only use the set included in the scope of delivery, for example the wooden block set or the pebble set, and place it exactly as described.
- Leave the space around the ionizing pin and the ignition pin free and never place any incandescent material around these pins.
- Make sure that the gas pipes and connections are clean and free of any impurities. Install a gas tap in accordance with the applicable regulations.
- Check the entire system for gas leaks before commissioning.
- Make sure that the pressure equalization hatch(es) on the top and/or bottom of the appliance are not blocked and check that these hatch(es) are well connected to the sealing surface before installing the appliance.
- Do not ignite the appliance until it has been fully installed in terms of gas technology, exhaust technology and electrical technology; first go through the procedure described in chapter 7.3 of the instructions.
- Do not use the appliance if a pane is broken and/or cracked. The pane must be replaced first.
Procedure for installing a built-in appliance:
- Use fireproof and heat-resistant materials for the fireplace surround, including the top of the fireplace surround and the material inside the fireplace surround, such as the floor under the appliance and the rear wall in front of which the appliance is installed. Both panel materials and stone-like materials can be used for this purpose.
- Take appropriate protective measures to ensure that the wall behind the fireplace surround and the materials or objects located behind the rear wall do not heat up too much.
- Observe the minimum specifications regarding the internal dimensions of the fireplace surround. These have been specified for safety reasons and to avoid extreme heat build-up in the fireplace conversion.
- Ventilate the fireplace conversion using ventilation openings (see instructions). These openings are crucial for safety and to prevent extreme heat build-up in the fireplace conversion.
- The electrical connections must be heat-resistant.
- Position the heat-resistant power connections away from the appliance and as low as possible in the fireplace surround.
- This applies in connection with the temperature development in the fireplace surround.
The appliance is designed to create a cozy atmosphere and to heat. This means that all visible surfaces, including the glass, can become hotter than 100°C. It is recommended to always place a protective grille in front of the appliance if children, the elderly or the physically disabled are in the same room as the appliance. If vulnerable persons may regularly be present in the room without supervision, a fixed screen must be fitted around the appliance.
